Product Description This OM3 Duplex Multimode Fibre Optic Cable is ideal for connecting 10 G Base-SR, 10 G Base-LRM, SFP+ & QSFP+ transceivers for 10 gigabit network connections. This cable has a LSZH jacket which protects from toxic & corrosive gases in poorly ventilated spaces & other areas where it is most critical. This cable also provides backward compatibility with existing 50/125 equipment & the performance headroom required to support LED & VCSEL laser light sources, & 10 Gigabit Ethernet applications. The Low Smoke Zero Halogen (LSZH / LS0H) jacket is composed from materials that lessen the smoke & halogen emissions when the cable is exposed to extreme temperatures. Connectors: • LC Connector Dimensions: 10.75mm Height x 12.5mm Width x 50mm Depth (with installed duplex clip) • ST Connector Dimensions: 9.8mm Height x 19.6mm Width x 59mm Depth Cable: • Optical Multimode 3 (OM3) fibre supporting 2000 MHz.km EMB at 850 nm. • 10 Gigabit transfers up to 300 metres using 850 nm VCSEL source • Maximum Connector Loss: 0.50 d B • Typical Connector Loss: 0.30 d B • Typical Return Loss: -25 d B • Buffer

Material: PVC • Buffer OD: 900 µm • Jacket

Material: LSZH PVC (OFNR riser-rated) • Jacket OD: 1.8 mm • Installation Tensile Load: 100 N (445 lbs) • Long-Term Tensile Load: 50 N (222 lbs) • Maximum Tensile Load: 100 N/cm • Installation (Loaded) Minimum Bend Radius: 5.0cm (1.97in) • Long-Term (Unloaded) Minimum Bend Radius: 3.0cm (1.2in) • Crush Resistance: 750 N/cm • Impact Resistance: 1, 000 cycles • Flex Resistance: 5, 000 cycles • Attenuation at 1300 nm: 1.0 d B/km • Attenuation at 850 nm: 3.5 d B/km • Operating Temperature: -20°C to +70°C



...

Product Description This OM3 Duplex Multimode Fibre Optic Cable is ideal for connecting 10 G Base-SR, 10 G Base-LRM, SFP+ & QSFP+ transceivers for 10 gigabit network connections. This cable has a LSZH jacket which protects from toxic & corrosive gases in poorly ventilated spaces & other areas where it is most critical. This cable also provides backward compatibility with existing 50/125 equipment & the performance headroom required to support LED & VCSEL laser light sources, & 10 Gigabit Ethernet applications. The Low Smoke Zero Halogen (LSZH / LS0H) jacket is composed from materials that lessen the smoke & halogen emissions when the cable is exposed to extreme temperatures. Connectors: • SC Connector Dimensions: 10.6mm Height x 26mm Width x 58mm Depth (with installed duplex clip) Cable: • Optical Multimode 3 (OM3) fibre supporting 2000 MHz.km EMB at 850 nm. • 10 Gigabit transfers up to 300 metres using 850 nm VCSEL source • Maximum Connector Loss: 0.50 d B • Typical Connector Loss: 0.30 d B • Typical Return Loss: -25 d B • Buffer

Material: PVC • Buffer OD: 900 µm • Jacket

Material: LSZH PVC (OFNR riser-rated) • Jacket OD: 2.8 mm • Installation Tensile Load: 100 N (445 lbs) • Long-Term Tensile Load: 50 N (222 lbs) • Maximum Tensile Load: 100 N/cm • Installation (Loaded) Minimum Bend Radius: 5.0cm (1.97in) • Long-Term (Unloaded) Minimum Bend Radius: 3.0cm (1.2in) • Crush Resistance: 750 N/cm • Impact Resistance: 1, 000 cycles • Flex Resistance: 5, 000 cycles • Attenuation at 1300 nm: 1.0 d B/km • Attenuation at 850 nm: 3.5 d B/km • Operating Temperature: -20°C to +70°C



...

Product Description Cost-effective solution that provides high bandwidth & transmission rates over longer distances. With LC to SC termination, this high quality fibre optic patch cable is specifically designed for Gigabit Ethernet applications. The Low Smoke Zero Halogen (LSZH / LS0H) jacket is composed from materials that lessen the smoke & halogen emissions when the cable is exposed to extreme temperatures. This reduces the amount of harmful toxic & corrosive gases that cabling made with plastic materials would otherwise emit into the air during combustion. This construction makes LSZH cables ideal to be used where the protection of people & equipment from harmful corrosive gases is absolutely critical. The patented injection moulding process provides each connection greater durability in resisting pulls, strains & impacts from cabling installs. Connectors: • LC Connector Dimensions: 10.75mm Height x 12.5mm Width x 50mm Depth (with installed duplex clip) • SC Connector Dimensions: 10.6mm Height x 26mm Width x 58mm Depth (with installed duplex clip) Cables: • Maximum Connector Loss: 0.50 d B • Typical Connector Loss: 0.30 d B • Typical Return Loss: -55 d B • Buffer

Material: PVC • Buffer OD: 900 µm • Jacket

Material: LSZH PVC (OFNR riser-rated) • Jacket OD: 1.8 mm • Installation Tensile Load: 100 N (445 lbs) • Long-Term Tensile Load: 50 N (222 lbs) • Maximum Tensile Load: 100 N/cm • Installation (Loaded) Minimum Bend Radius: 5.0cm (1.97in) • Long-Term (Unloaded) Minimum Bend Radius: 3.0cm (1.2in) • Crush Resistance: 750 N/cm • Impact Resistance: 1, 000 cycles • Flex Resistance: 5, 000 cycles • Attenuation at 1550 nm: 0.25 d B/km • Attenuation at 1310 nm: 0.35 d B/km • Operating Temperature: -20°C to +70°C



...

Product Information 2 Work Blue 10 Inch Paper Hygiene Roll This roll of blue hygienic paper towels is strong & versatile & can be used in a range of situations to protect surfaces & provide fast & effective dirt removal. ideal to be used in hospitals, dental & GP surgeries, first aid rooms & beauty salons, this hygiene roll is designed to keep areas used by patients, staff or customers sanitary. This roll is perforated to allow ease of use & can also be used for wiping, drying & polishing surfaces. The two ply paper is stronger & more durable, making it suitable for frequent use. ideal to be used within the workplace, the 10 inch roll offers a long lasting, hard wearing cleaning & hygiene solution that can always be relied on. Designed for high use applications Absorbent, affordable & hygienic 2-ply high strength for durability Great for hospitals, dental & GP surgeries, first aid rooms & beauty salons Can also be used for drying, wiping & polishing surfaces Suitable for a range of uses Measures 10 inches high & is 40 metres in length

Colour: Blue Pack of 1 x 2-ply roll

...

Product Description This Booted Shielded Cat 6a patch cable is ideal to be used with 10 G Base-T ports & equipment, such as network adapters, hubs, switches, routers, DSL/cable modems & patch panels, & will protect a high speed 10 Gigabit network connection from noise & electromagnetic interference. For voice/data/video distribution, this cable will handle bandwidth-intensive applications & drastically reduces both impedance & structural return loss (SRL). Each patch cable is fully tested to meet ANSI/TIA 568 C.2 Cat 6a component requirements. Each of the individual pairs is bonded together to help maintain the twist-spacing throughout the line right up to the termination point. Constructed from high quality cable & plugs, this design minimises Near-End Crosstalk (NEXT) levels. The moulded, snagless boot prevents unwanted cable snags during installation & provides extra strain relief. Available in a variety of colours to easily color-coded a network installation. Each cable is individually labelled with the length for ease of use. Product Features • Snagless booted design protects clips when plugging & unplugging • Standard shielded RJ45 connectors & shielded twisted pair wires • Available in 4 colours to colour-code a network • Available in lengths up to 30m Physical Characteristics • Cable type: Stranded SSTP • Wiring scheme: 568B • Temperature rating: 75°C • Testing: ANSI/TIA 568 C.2 Cat 6a component tested • ISO/IEC 11801: S/FTP (Shielded/ Foiled Twisted Pair) Conductor (4 pair) • Conductor type: 26AWG (7/0.16) (bare copper) • Insulation: FM-PE Overall cable • Foil shield: Aluminium foil (100% coverage) • Braided shield: Copper braid (40% coverage) • Jacket: PVC Connector • Connector Type: RJ-45 Male • Shell: Nickel plated for shielding • Housing: Polycarbonate, UL94V-0 • Contacts: 50µm gold plated • Hood: Moulded Snagless PVC UL94V-0 • Dimension (L x W x H): 38.2 x 11.6 x 15.1 ...

Product Description Cost-effective solution that provides high bandwidth & transmission rates over longer distances. With LC to SC termination, this high quality fibre optic patch cable is specifically designed for Gigabit Ethernet applications. The Low Smoke Zero Halogen (LSZH / LS0H) jacket is composed from materials that lessen the smoke & halogen emissions when the cable is exposed to extreme temperatures. This reduces the amount of harmful toxic & corrosive gases that cabling made with plastic materials would otherwise emit into the air during combustion. This construction makes LSZH cables ideal to be used where the protection of people & equipment from harmful corrosive gases is absolutely critical. The patented injection moulding process provides each connection greater durability in resisting pulls, strains & impacts from cabling installs. Connectors: • LC Connector Dimensions: 10.75mm Height x 12.5mm Width x 50mm Depth (with installed duplex clip) • SC Connector Dimensions: 10.6mm Height x 26mm Width x 58mm Depth (with installed duplex clip) Cables: • Maximum Connector Loss: 0.50 d B • Typical Connector Loss: 0.30 d B • Typical Return Loss: -55 d B • Buffer

Material: PVC • Buffer OD: 900 µm • Jacket

Material: LSZH PVC (OFNR riser-rated) • Jacket OD: 1.8 mm • Installation Tensile Load: 100 N (445 lbs) • Long-Term Tensile Load: 50 N (222 lbs) • Maximum Tensile Load: 100 N/cm • Installation (Loaded) Minimum Bend Radius: 5.0cm (1.97in) • Long-Term (Unloaded) Minimum Bend Radius: 3.0cm (1.2in) • Crush Resistance: 750 N/cm • Impact Resistance: 1, 000 cycles • Flex Resistance: 5, 000 cycles • Attenuation at 1550 nm: 0.25 d B/km • Attenuation at 1310 nm: 0.35 d B/km • Operating Temperature: -20°C to +70°C



...

This adapter cable is an ideal solution for connecting the Mini Display Port or Thunderbolt™ output of a small laptop or tablet to a computer monitor which accepts a DVI-D input. This cable carries a digital video signal, supports up to a 1920x 1200 resolution & meets the requirements of high performance applications. Product Features • Directly connect a Mini Display Port output to a Single Link DVI-D input • Carries a digital video signal • Supports up to a 1920x 1200 resolution ...

3M USB (Universal Serial Bus) 2.0 A/B Cable in White Connect your USB (Universal Serial Bus) device to the USB (Universal Serial Bus) port on your USB (Universal Serial Bus) hub, desktop PC or Mac Features Make plug-&-play connections for such devices as keyboards, mice, modems, printers & other USB (Universal Serial Bus) peripherals Connect a USB (Universal Serial Bus) peripheral to a USB (Universal Serial Bus) Hub or USB (Universal Serial Bus) port on PC/ Mac Foil & braid shielding reduces EMI/RFI interference & twisted-pair construction helps reduce crosstalk, thus ensuring high speed, error-free data transfer More detail Just plug-&-play for keyboards, mice, modems, printers, & other USB (Universal Serial Bus) peripherals. This cable provides a transfer rate up to 480 Mbps depending upon the peripherals USB (Universal Serial Bus) version, & easily attaches to any USB (Universal Serial Bus) device. Foil & braid shielding reduces EMI/RFI interference & twisted pair construction helps reduce crosstalk thus ensuring high speed, error-free data transfer. Specifications

Colour: White Length: 3.00 Meter Warranty: Lifetime Weight: 0.117kg

...

Product Description This Booted Shielded Cat 6a patch cable is ideal to be used with 10 G Base-T ports & equipment, such as network adapters, hubs, switches, routers, DSL/cable modems & patch panels, & will protect a high speed 10 Gigabit network connection from noise & electromagnetic interference. For voice/data/video distribution, this cable will handle bandwidth-intensive applications & drastically reduces both impedance & structural return loss (SRL). Each patch cable is fully tested to meet ANSI/TIA 568 C.2 Cat 6a component requirements. Each of the individual pairs is bonded together to help maintain the twist-spacing throughout the line right up to the termination point. Constructed from high quality cable & plugs, this design minimises Near-End Crosstalk (NEXT) levels. The moulded, snagless boot prevents unwanted cable snags during installation & provides extra strain relief. Available in a variety of colours to easily color-coded a network installation. Each cable is individually labelled with the length for ease of use. ISO/IEC 11801: S/FTP (Shielded/ Foiled Twisted Pair); Overall braided Shielding, over four Foil-shielded Twisted Pairs. Product Features • Snagless booted design protects clips when plugging & unplugging • Standard shielded RJ45 connectors & shielded twisted pair wires • Available in 4 colours to colour-code a network • Available in lengths up to 30m Physical Characteristics • Cable type: Stranded SSTP • Wiring scheme: 568B • Temperature rating: 75°C • Testing: ANSI/TIA 568 C.2 Cat 6a component tested • ISO/IEC 11801: S/FTP (Shielded/ Foiled Twisted Pair) Conductor (4 pair) • Conductor type: 26AWG (7/0.16) (bare copper) • Insulation: FM-PE Overall cable • Foil shield: Aluminium foil (100% coverage) • Braided shield: Copper braid (40% coverage) • Jacket: PVC Connector • Connector Type: RJ-45 Male • Shell: Nickel plated for shielding • Housing: Polycarbonate, UL94V-0 • Contacts: 50µm gold plated • Hood: Moulded Snagless PVC UL94V-0 • Dimension (L x W x H): 38.2 x 11.6 x 15.1 ...

Technical details & special

Features: ATX/ Micro ATX

Specification compliant Front door made



...