Protect your high speed network from noise & electromagnetic interference when you connect with our shielded Cat 5e patch cable. Constructed from high quality cable & plugs, this design minimises Near-End Crosstalk (NEXT) levels. The moulded boot provides extra strain relief & durability. Available in a variety of colours to easily colour-code your network installation.

Colour: White Warranty: Lifetime Vendor: C2G Weight: 0.216kg Length: 5.00 Meter • Conductor: 4-pair 24 AWG stranded STP • Connector: Shielded 50 micron gold-plated RJ45 • Jacket: PVC • Wired: TSB 568B (AT&T 258A) • Foil shielding with drain wire • Certification: TIA/EIA Uses: • 1000 BASE-T; 100 BASE-T; 10 BASE-T (IEEE 802.3) • 4/16 Mbps Token Ring (IEEE 802.5); 100 VG-Any LAN • 100 Mbps TP-PMD (ANSI X3T9.5); 55/155 Mbps ATM • Voice

...

Protect your high speed network from noise & electromagnetic interference when you connect with our shielded Cat 5e patch cable. Constructed from high quality cable & plugs, this design minimises Near-End Crosstalk (NEXT) levels. The moulded boot provides extra strain relief & durability. Available in a variety of colours to easily colour-code your network installation.

Colour: White Warranty: Lifetime Vendor: C2G Weight: 0.297kg Length: 7.00 Meter • Conductor: 4-pair 24 AWG stranded STP • Connector: Shielded 50 micron gold-plated RJ45 • Jacket: PVC • Wired: TSB 568B (AT&T 258A) • Foil shielding with drain wire • Certification: TIA/EIA Uses: • 1000 BASE-T; 100 BASE-T; 10 BASE-T (IEEE 802.3) • 4/16 Mbps Token Ring (IEEE 802.5); 100 VG-Any LAN • 100 Mbps TP-PMD (ANSI X3T9.5); 55/155 Mbps ATM • Voice

...

C2G DB37 F/F Mini Gender Changer Convert a DB37 male connection to a DB37 female connection; use for external tape backup or Bernoulli box applications. Low profile to save space! Quickly change the gender, or join two cables together. Save the cost & hassle of buying a new cable by just changing the gender of your port & using the cable you already have. Each changer is snagless & fully shielded, preventing any unwanted EMI/RFI interference caused from office equipment. Features Converts a DB37-Pin Male connector to a DB37-Pin Female connector Designed for external tape back-up or Bernoulli Box applications Low-profile design ...

Null modem serial cables from Cables to Go allow two DTE or DCE devices to communicate with no conflict in data transmission. Transmit & receive signals are crossed to ensure proper data transmission. These high quality-Cables deliver data quickly & reliably over short distances. ...

Overview Display Port is a next-generation technology that delivers high bandwidth, pure digital audio/video signals from your PC to your display. Quality-made from 28 AWG copper wire, this cable is designed to deliver sharp, crystal-clear picture & sound, & is fully shielded to protect against EMI/RFI (Aluminium-wrapped, with a copper braid shield). Certified to Display Port 1.1 standards, it supports 10.8 Gbps, 12 bpc (bits per component), 36 bpp (bits per pixel), & has a 120 Hz refresh rate. Nickel-plated connectors; lifetime warranty. Please Note: 1.1 supports a single video source, & our Display Port cables & adapters support this

Specification. For reference, version 1.2, as it occurs in the future, will support multiple video streams for such devices that require the additional bandwidth. Connector 1: (1) Display Port Male Connector 2: (1) Display Port Male
Colour: Black UPC:757120812982 Warranty: Lifetime Weight: 0.410kg Length: 5.00 Meter


...

This Display Port to DVI-D Active Adapter is the perfect solution for connecting the video output of a Display Port equipped laptop other source device to the DVI-D input of a monitor, HDTV or projector in a classroom, on a desktop, or in conference & meeting rooms. This adapter can be used can be used in either Display Port single-mode or dual-mode outputs, providing the conversion for a Display Port source even when that source does not support DP++. Active Display Port conversion is excellent for applications where Display Port adapters are required to connect to a single graphics card. This allows every active adapter to interface with a corresponding display. The compact design offers simple, plug-&-play installation with no drivers required, which makes it perfect for BYOD (Bring Your Own Device) applications in education or corporate environments. in addition, the device is powered through Display Port bus power, so no additional power adapters are required. The dongle-style adapter reduces strain on the video port. Note: when connected to a Display Port source device that supports both audio & video and/or 4K signal, as well as a DVI-D to HDMI Cable plugged into an HDMI display which supports either or both of the above, these can be transmitted from source to display. ...

C2G Display Port to HDMI Adapter Adapts a Display Port connector to HDMI for display of PC video content on virtually any high-definition digital display Features Connector 1: Display Port Male Connector 2: HDMI Female Small, compact design

Colour: Black Supports up to a 1080p resolution

...

This Display Port to DVI-D adapter converter is the perfect solution for connecting the Display Port output of a laptop to the DVI-D input of a computer monitor or other display, allowing you to integrate a more modern device into an existing setup. This adapter carries a digital video signal, supports up to a 1920x 1200 resolution & meets the requirements of high-performance desktop applications. ...

C2G Duplex Multimode PVC Fibre Optic Cable 2M This OM3 Duplex Multimode Fibre Optic Cable is ideal for connecting 10 G Base-SR, 10 G Base-LRM, SFP+ & QSFP+ transceivers for 10 gigabit network connections. This cable has a LSZH jacket which protects from toxic & corrosive gases in poorly ventilated spaces & other areas where it is most critical. This cable also provides backward compatibility with existing 50/125 equipment & the performance headroom required to support LED & VCSEL laser light sources, & 10 Gigabit Ethernet applications. Specifications C2G

Colour: Aqua Length: 2M Pack

Size: 1



...

C2G Duplex Multimode PVC Fibre Optic Cable 5M This OM3 Duplex Multimode Fibre Optic Cable is ideal for connecting 10 G Base-SR, 10 G Base-LRM, SFP+ & QSFP+ transceivers for 10 gigabit network connections. This cable has a LSZH jacket which protects from toxic & corrosive gases in poorly ventilated spaces & other areas where it is most critical. This cable also provides backward compatibility with existing 50/125 equipment & the performance headroom required to support LED & VCSEL laser light sources, & 10 Gigabit Ethernet applications. Specifications C2G

Colour: Aqua Length: 5M Pack

Size: 1



...