This Booted Shielded Cat 6a patch cable is ideal to be used with 10 G Base-T ports & equipment, such as network adapters, hubs, switches, routers, DSL/cable modems & patch panels, & will protect a high speed 10 Gigabit network connection from noise & electromagnetic interference. For voice/data/video distribution, this cable will handle bandwidth-intensive applications & drastically reduces both impedance & structural return loss (SRL). Each patch cable is fully tested to meet ANSI/TIA 568 C.2 Cat 6a component requirements. Each of the individual pairs is bonded together to help maintain the twist-spacing throughout the line right up to the termination point. Constructed from high quality cable & plugs, this design minimises Near-End Crosstalk (NEXT) levels. The moulded, snagless boot prevents unwanted cable snags during installation & provides extra strain relief. Available in a variety of colours to easily color-coded a network installation. Each cable is individually labelled with the length for ease of use. ISO/IEC 11801: S/FTP (Shielded/ Foiled Twisted Pair); Overall braided Shielding, over four Foil-shielded Twisted Pairs. Connector 1: (1) RJ-45 Male Connector 2: (1) RJ-45 Male ...

This Booted Shielded Cat 6a patch cable is ideal to be used with 10 G Base-T ports & equipment, such as network adapters, hubs, switches, routers, DSL/cable modems & patch panels, & will protect a high speed 10 Gigabit network connection from noise & electromagnetic interference. For voice/data/video distribution, this cable will handle bandwidth-intensive applications & drastically reduces both impedance & structural return loss (SRL). Each patch cable is fully tested to meet ANSI/TIA 568 C.2 Cat 6a component requirements. Each of the individual pairs is bonded together to help maintain the twist-spacing throughout the line right up to the termination point. Constructed from high quality cable & plugs, this design minimises Near-End Crosstalk (NEXT) levels. The moulded, snagless boot prevents unwanted cable snags during installation & provides extra strain relief. Available in a variety of colours to easily color-coded a network installation. Each cable is individually labelled with the length for ease of use. ISO/IEC 11801: S/FTP (Shielded/ Foiled Twisted Pair); Overall braided Shielding, over four Foil-shielded Twisted Pairs. Connector 1: (1) RJ-45 Male Connector 2: (1) RJ-45 Male ...

Experience the next generation of networking with Cat 6a patch cables from C2G. These network cables enable 10 gigabit data transmission over a 4 twisted pair copper cable, allowing connection distances up to 100 meters. Current Cat 6 cabling systems may only support 10 gigabit ethernet over limited distances. The Cat 6a draft extends the Cat 6 electrical specifications from 250 MHz to 500 MHz. It also proposes a new measurement for Power-Sum Alien Crosstalk to 500 MHz. Alien Crosstalk is a coupled signal in a disturbed pair arising from a signal in a neighboring cable. Low-profile, snagless hood is ideal for high-density switch applications. Connector 1: (1) RJ-45 Male Connector 2: (1) RJ-45 Male
Colour: Grey Warranty: Lifetime Weight:0.131kg Length:3.00 Meter
...

Overview Experience the next generation of networking with Cat 6a patch cables from C2G. These network cables enable 10 gigabit data transmission over a 4 twisted pair copper cable, allowing connection distances up to 100 meters. Current Cat 6 cabling systems may only support 10 gigabit ethernet over limited distances. The Cat 6a draft extends the Cat 6 electrical specifications from 250 MHz to 500 MHz. It also proposes a new measurement for Power-Sum Alien Crosstalk to 500 MHz. Alien Crosstalk is a coupled signal in a disturbed pair arising from a signal in a neighboring cable. Low-profile, snagless hood is ideal for high density switch applications. Connector 1: (1) RJ-45 Male Connector 2: (1) RJ-45 Male
Colour: Blue UPC: 757120899129 Warranty: Lifetime Vendor: C2G Weight: 0.208kg Length: 5.00 Meter • Supports IEEE 802.3af & is DTE power compliant • Compatible with T568A & T568B wiring • Provides NEXT performance beyond 600 MHz • Po E rated to four times the standard
...

This Booted Shielded Cat 6a patch cable is ideal to be used with 10 G Base-T ports & equipment, such as network adapters, hubs, switches, routers, DSL/cable modems & patch panels, & will protect a high speed 10 Gigabit network connection from noise & electromagnetic interference. For voice/data/video distribution, this cable will handle bandwidth-intensive applications & drastically reduces both impedance & structural return loss (SRL). Each patch cable is fully tested to meet ANSI/TIA 568 C.2 Cat 6a component requirements. Each of the individual pairs is bonded together to help maintain the twist-spacing throughout the line right up to the termination point. Constructed from high quality cable & plugs, this design minimises Near-End Crosstalk (NEXT) levels. The moulded, snagless boot prevents unwanted cable snags during installation & provides extra strain relief. Available in a variety of colours to easily color-coded a network installation. Each cable is individually labelled with the length for ease of use. ISO/IEC 11801: S/FTP (Shielded/ Foiled Twisted Pair); Overall braided Shielding, over four Foil-shielded Twisted Pairs. Connector 1: (1) RJ-45 Male Connector 2: (1) RJ-45 Male ...

Snagless booted design for network adapters, hubs, switches, routers, DSL/cable modems, patch panels & other high performance networking applications. For fast Ethernet networks that require bandwidth-intensive voice, data, or video distribution applications. Meets all Cat 5e TIA/EIA standards, & drastically reduces both impedance & structural return loss (SRL). Each of the individual pairs are bonded together to help maintain the twist-spacing throughout the line right up to the termination point. Constructed from high quality copper cable, this design minimises Near-End Crosstalk (NEXT) levels. The moulded, snagless boot prevents unwanted cable snags during installation & provides extra strain relief. Available in a variety of colours to easily colour-code your network installation. Each cable is individually labelled with the length for ease of use. Product Features • Snagless booted design protects clips when plugging & unplugging • Standard RJ45 connectors & unshielded twisted pair wires • Available in 11 colours to colour-code a network • Available in lengths up to 100m Electrical Characteristics • Conductor DC Resistance: 89 Ohm/km (maximum) • Insulation Resistance: 100 Ohm/km (minimum) • Dielectric Strength: 500 MV/m Physical Characteristics • Conductor Type/ Size
- Bare Copper Stranded, 24 AWG (7/0/2.0) Insulation • Material
- H-D PE • Diameter
- 0.95 ± 0.05mm • Colours
- Blue/ Blue-White, Orange/ Orange-White, Green/ Green-White, Brown/ Brown-White Jacket • Material
- FR-PVC • Nominal Thickness
- 0.55mm • Outer Diameter
- 5.30mm Connector • Material
- Polycarbonate • Hood Material
- Moulded PVC • Contact Material
- Copper alloy plated with gold-50µm • Number of contacts
- Eight Conductor • 4-pair (UTP) 24 AWG stranded copper • 50 micron gold-plated RJ45 Other Specifications • Approvals
- Ro HS Compliant, Verified to EIA/TIA 568B.2 • Wired
- TSB 568B AT&T 258A • Package Type
- Polybag Product Uses • 1000 BASE-T; 100 BASE-T; 10 BASE-T (IEEE 802.3) • 4/16 Mbps Token Ring (IEEE 802.5); 100 VG-Any LAN • 100 Mbps TP-PMD (ANSI X3T9.5); 55/155 Mbps ATM • Voice













...

C2G 0.3m Cat 6 Booted Unshielded (UTP) Network Patch Cable
- Black For fast Ethernet & Gigabit computer networks that require bandwidth-intensive
...

For voice/data/video distribution, this cable will handle bandwidth-intensive applications up to 350 MHz. Meets all Cat 5E TIA/EIA standards, & drastically reduces both impedance & structural return loss (SRL) when compared to standard 100 MHz wire. Each of the individual pairs is bonded together to help maintain the twist-spacing throughout the line right up to the termination point. Constructed from high-quality cable & a shortened body plug, this design minimizes Near-End Crosstalk (NEXT) levels. The moulded, snagless boot prevents unwanted cable snags during installation & provides extra strain relief. Available in a variety of Colours to easily colour-code your network installation. Connector 1: (1) RJ45 Connector Connector 2: (1) RJ45 Connector ...

One port delivers it all with Thunderbolt 3 Thunderbolt 3 brings lightning speed data transfer, dual 4K video support, high bit depth audio, & power delivery up to 100W. Get more done with less hassle by carrying one cable to complete nearly any task. Thunderbolt 3 utilises the USB (Universal Serial Bus) Type-C Connector The USB (Universal Serial Bus)-C connector is symmetrical & identical on both sides, so it does not matter if you plug it in upside-down or right-side-up. Plug it in for a successful connection the first time, every time, whilst preventing damage to the connector port. The USB (Universal Serial Bus) Type-C connector has a robust design, allowing for the connector to be plugged in & un-plugged up to 10, 000 times. The sturdy construction ensures that the product provides peace of mind & is built to stand up to the rigors the most demanding on-the-go life. Thunderbolt 3 brings lightning-speed data transfer, dual 4K at 60 Hz video support, high bit depth audio, & power delivery up to 100W. Deliver up to 40 Gbps to or from a Thunderbolt 3 enabled port. Whether uploading or downloading data, this cable is an ideal solution to transfer large amounts of information such as high-resolution photos for editing or storage, 3D models for video game authoring or HD video for editing. Whether you’re desk-based or on-the-road, this lightweight, portable one-cable solution ensures that your Thunderbolt 3 equipped laptop, smartphone, or tablet is fully charged & ready to go whilst displaying ULTRA HD video content, transferring files, or streaming audio. Deliver up to 100W of charging power to or from the connected device with smart power delivery. With its robust design, the USB (Universal Serial Bus)-C connector can be plugged in & un-plugged up to 10, 000 times; six times more than a standard USB (Universal Serial Bus) A Connector. in addition, the USB (Universal Serial Bus)-C connector is user-friendly & has a symmetrical design which is identical on both sides, which means it does not matter if you plug it in upside-down or right-side-up
- it will plug in the first time, every time, whilst preventing damage to the connector port.
...

Why run all new cables for RS-232 control of your audio/video system, when you can use this easy adapter? The Velocity RS-232 adapter leverages your DB9 or 3.5mm stereo audio cable to run 3-conductor RS-232 control signals between your control unit & your video display. Fully moulded DB9 & 3.5mm connectors provide excellent strain relief. This adapter is ideal to be used with computers, projectors, & any control unit/display requiring 3-conductor RS-232 serial control. Please Note: Not all serial control methods are supported by this adapter. This product is intended only for use with 3-wire RS-232 control cables with common ground (pin 5), transmit data (pin 3), & receive data (pin 2) Product Specifications Colour: Black Length: 0.50 Meter Jacket Rating: Standard Non-Rated UPC: 757120871873 Warranty: Lifetime Vendor: C2G Weight: 0.060kg Pin-out: • DB9 Pin 3 to 3.5mm Tip • DB9 Pin 2 to 3.5mm Ring • DB9 Pin 5 to 3.5mm Sleeve ...